|
NanoShield METAL
ONE STEP CLEAN AND PROTECT
 NanoShield METAL is a product for the removal of stubborn tea stains, oxidation and contaminations from uncoated metal surfaces like stainless steel, aluminum and other uncoated metals. A Nano-scale abrasive blend makes it easy to remove all stains and the hydrophobic active substance provide a long lasting, ultra thin protection and a durable easy to clean surface effect.
Stainless steel and other metals will stay shiny and protected even at harsh marine environments or in areas with high pollution or dust levels.
Older and contaminated surfaces can be brought back to the original look and lustre. Water runs off easily from the treated surface. Contamination and dirt can be easily wiped off with a wet cloth. The protective effect lasts up to 6 months, Periodic reapplication will increase the coating’s life span.
The product can be applied directly to the substrate to be cleaned or to be protected, without further preparation. Low consumption between 20 and 50 ml a square metre depending on the conditions of the substrate.
Packing Sizes: 100g, 250g packing. 1kg will cover between 20-60 sq m (180-540 sq ft)
 Untreated Side Treated Side
The 2 pictures above show the treated and untreated badly corroded pipe in Egypt. The treatment was eventually done on the remaining 2 km of pipeline.
APPLICATION DIRECTIONS
Surface preparation: The surface must be dry.
Application Directions : Apply evenly with micro fiber cloth and polish until metal is clean and shinny. Remove excess product during or directly after the application with soft cloth.
Click here for NanoShield METAL Brochure and MSDS.
How to buy?
Samples for Trial and Evaluation are available for purchase online by clicking here.
For Commercial and Project Quantities, please contact us by email or by phone. For contact details, please click here.
Please use the form below to send us an email.
|
|
|
|||||||||||
|
| Web Design Gold Coast | Snowball Internet. Powered by webEFEKTs. |
|